Chapter 3 Maintenance & Technical Specifications; Introduction; Maintenance; General Scanner Maintenance - Symbol DS4308 Product Reference Manual

CHAPTER 3 MAINTENANCE & TECHNICAL

Introduction

This chapter provides suggested digital scanner maintenance, troubleshooting, technical specifications, and
signal descriptions (pinouts).

Maintenance

General Scanner Maintenance

Cleaning the scan window is required. A dirty window can affect scanning accuracy.
•
Do not allow abrasive material to touch the window.
•
Remove any dirt particles with a damp cloth.
•
Wipe the window using a tissue moistened with approved cleanser (listed below).
•
Do not spray water or other cleaning liquids directly into the window.
In addition to the cleaning requirements above, healthcare configurations of the scanner (DS4308-HC) may
require additional maintenance.

Healthcare Scanner Maintenance

The DS4308-HC design allows safe cleansing of the product plastics with a variety of cleaning products and
disinfectants. If required, wipe the digital scanner with the following list of approved cleansers:
•
Isopropyl alcohol
•
Bleach/sodium hypochlorite
•
Hydrogen peroxide
•
Gentle dish soap and water
IMPORTANT
SPECIFICATIONS
Cleansers that contain active ingredients not listed above should not be utilized on the
DS4308-HC digital scanner.