Existence Of Dip Switch, Jumper And Bs; Reference Table - Daikin SkyAir Super Inverter 70 D Series Service Manual

Existence of DIP Switch, Jumper and BS

3. Existence of DIP Switch, Jumper and BS

3.1

Reference Table

RZP71~140D
Model
1 Emergency
Operation
2
Night-time Automatic Low Noise
3
DIP Switch 1
Setting
4 Capacity Preceding Setting
1 Defrost Slow Starting Setting
2 Defrost Quick Starting Setting
DIP Switch 3
3 Defrost Sound Reduction Setting Reduces impact sound by stopping compressor
4 ON/OFF Frequency Reduction
Setting
BS Forced Defrost/Pump Down
CN26/X26A Capacity Setting Adapter
Note: DIP Switch and BS Detail
Caution: Do not set DS2 dip switch.
Caution: DIP switches are factory set and it is not necessary to change switches in normal condition.
Make sure to confirm the settings on spare parts P.C. board, before replacing.
Refer "Initial DIP switch setting list" on next page.
Refer "On-site setting switches" on following page for more detail.
60
ON/OFF
Cool/Heat
Do not change switches other than above mentioned, otherwise, operation trouble may be
occurred.
Night-time
Capacity
Emergency automatic
preceding
low noise
setting
ON COOL ON
ON
ON
nn nn
1 2 3 4
OFF
OFF
OFF HEAT OFF
DS1 (P.C.B A3P)
Refer to " (20) Emergency operation
Lowers operation sound by conducting a Low
noise operation automatically in night-time.
Capacity has priority to operation sound when
night-time automatic low noise mode has been
set.
Makes defrost starting hard by changing
temperature or time conditions for defrost starting.
Makes defrost starting easy by changing
temperature or time conditions for defrost starting.
once at starting or ending defrost operation.
Reduces ON/OFF frequency by changing
thermostat ON condition.
Forced defrost/pump down operation.
The switch is used when installing spare PCB.
setting
ON
ON
ON
nn nn
1 2 3
OFF
OFF
OFF
DS3 (P.C.B A1P)
RZP71~140D
" on page 155.
(Spare parts is
BS1
4
SiE25-110
.)
(S2538)
Field Setting