SiE25-110
1.6
Removal of Switch Box
Procedure
before disassembling work.
Step
1
Remove the 2 mounting
screws on the switch
box cover.
2
Remove the 1 mounting
screw on the terminal
block cover.
3
Disconnect each
connector
(7 connectors in total)
connected to the inside
of the switch box.
Transfer connector
x 3 pieces
Direct connector x 4
pieces
4
Disconnect the
connector for fan motor.
For FHYCP71D :
Direct connector
For FHYCP100~
140D : Relay
connector
5
Remove the grounding
wire mounting screw.
6
Remove the switch box
fixing screw.
Removal Procedure
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
Procedure
FHYCP71~140D
Points
203