Method of Field Set (Reset after Maintenance Inspection/Repair)
1.2.2 Wireless Remote Controller
Note:
If optional accessories are mounted on the indoor unit, the indoor unit setting may have to be
changed. Refer to the instruction manual (optional hand book) for each optional accessory.
Procedure
1. When in the normal mode, push the "
2. Select the desired MODE NO. with the "
3. Push the "
4. Push the "
5. Push the "
6. Push the "
42
and the FIELD SET MODE is entered.
" button and select the FIRST CODE NO.
" button and select the SECOND CODE NO.
" button and the present settings are SET.
" button to return to the NORMAL MODE.
" button for a minimum of four seconds,
" button.
SiE25-110
Field Setting