Genie GS-1530 Operator's Manual page 9

Sixth Edition • First Printing
Safety signs and locations
DANGER
Crushing hazard
Contact with
moving parts will
result in death or
Keep away from moving
serious injury.
parts.
44255 C
DANGER
Engage
safety arm
Crushing Hazard
See service
before
Death or serious injury can
performing manual.
result from contact with
maintenance
moving scissor arms.
or repair.
82561 B
DANGER
Tip-over Hazard
Altering or disabling limit
switches can result in
machine tip-over. Machine
tip-over will result in death
or serious injury.
Do not alter or disable limit
switch(s).
31060 C
DANGER
Explosion / Burn Hazard
Ignition of explosive gases or contact with corrosive
acid will cause death, burns or blindness
Keep all open flames and sparks away. Wear
personal protective equipment, including face
shield, gloves and long sleeve shirt.
READ MANUALS
Read all manuals prior to operation.
DO NOT OPERATE equipment if you do not
understand the information in the manuals.
Consult your supervisor, the owner or the
manufacturer.
31788 C
WARNING
Crushing hazard.
Lowering the outriggers or
tires onto a person's foot can
result in serious injury.
Keep clear of outriggers and
tires before lowering.
Part No. 227286
DANGER
Tip-over hazard.
Failure to replace batteries
with proper weight
batteries will
result in death or serious
injury.
Batteries are used as
counterweight and are critical to
machine stability. Each battery
must weigh 65 lbs / 29.5 kg.
=
Battery box including batteries
335 lbs / must weigh a minimum of 335 lbs
152 kg
/ 152 kg.
114360 A
GS-30 • GS-32 • GS-46
DANGER
Electrocution Hazard
Death or injury can result from contacting electric power
lines.
Always contact the electric power line owner. The electric
power shall be disconnected or the power lines moved or
insulated before machine operations begin.
Collision Hazard
Failure to secure machine before
releasing brakes will result in
death or serious injury.
Brake Release Operation
1 Chock wheels to prevent machine
2 Be sure winch line is properly secured
3 Push in black brake release knob to
4 Pump red brake release pump knob.
DANGER
Tip-over hazard.
Raising the
platform or
driving the
machine with
Close chassis trays
chassis trays
before raising the
open will result
platform or driving
in death or
the machine.
serious injury.
Operator's Manual
General Safety
114385
Maintain required clearance.
Line voltage Required clearance
0 to 50KV 10 ft 3.05 m
50KV to 200KV 15 ft 4.60 m
200KV to 350KV 20 ft 6.10 m
350KV to 500KV 25 ft 7.62 m
500KV to 750KV 35 ft 10.67 m
750KV to 1000KV 45 ft 13.72 m
DANGER
1 Make sure
machine is on a
firm, level surface
or secured.
2 Chock wheels.
3 Release brakes.
INSTRUCTIONS
After machine is loaded:
1 Chock wheels to prevent
machine from rolling.
from rolling.
2 Press drive function select
button. Press and hold function
to drive chassis tie points and path is
enable switch on control handle.
clear of all obstructions.
Move control handle off center to
reset brakes.
open brake valve.
97712 B
DANGER
Electrocution / Fire Hazard
Death or serious injury will
result from use of improper or
damaged cord and outlet.
Connect charger to a grounded
AC 3-wire electrical outlet only.
Before each use, inspect for
damaged cord, cables and
wires. Replace damaged items
before operating.
31508 D
WARNING
Crushing hazard.
Lowering the outriggers or
tires onto a person's foot can
result in serious injury.
Keep clear of outriggers and
44737 B
tires before lowering.
A
7