Genie GS-1530 Operator's Manual page 51

Sixth Edition • First Printing
GS-2046, GS-2646 and GS-3246
The platform railing system consists of three fold
down rail sections for the extension deck and three
sections for the main deck. All six sections are held
in place by four wire lock pins.
1 Fully lower the platform and retract the platform
extension.
2 Remove the platform controls.
3 From inside the platform, remove the two front
wire lock pins.
4 Fold down the front rail assembly. Keep hands
clear of pinch points.
5 Replace the two removed pins back into each
side rail bracket.
6 Fold down each side rail assembly. Keep hands
clear of pinch points.
7 At the rear of the main deck, remove the two
wire lock pins.
8 Carefully open the gate and move to the
ground.
9 Fold down the rear gate and entry side rails as
one unit. Keep hands clear of pinch points.
10 Fold down the left and right side rails. Keep
hands clear of pinch points.
11 Replace the two removed pins back into each
side rail bracket.
How to Raise the Guardrails
Follow the fold down instructions but in reverse
order.
Part No. 227286 GS-30 • GS-32 • GS-46
Operator's Manual
Operating Instructions
49