Genie GS-1530 Operator's Manual page 50

Hide thumbs Also See for GS-1530:
Table of Contents

Advertisement

Operator's Manual
Operating Instructions
Operation From Ground with
Controller
Maintain safe distances between the operator,
machine and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
Platform Overload
Flashing OL in the LED diagnostic
readout indicates the platform is
overloaded and no functions will
operate. An alarm will sound.
1 Push in the Red Emergency stop button to the
off position.
2 Remove weight from the platform.
3 Pull out the Red Emergency stop button to the
on position.
Battery Level Indicator
Full
Low
Use the LED diagnostic readout to determine the
battery level.
How to use the Safety Arm
1 Raise the platform approximately 2.4 m from the
ground.
2 Rotate the safety arm away from the machine
and let it hang down.
3 Lower the platform until the safety arm rests
securely on the link. Keep clear of the safety
arm when lowering the platform.
48
How to Fold Down the Guardrails
GS-1530, GS-1532, GS-1930, GS-1932, GS-2032,
GS-2632 and GS-3232
The platform railing system consists of one fold
down rail section for the extension deck and one
section for the main deck. All sections are held in
place by four wire lock pins.
1 Fully lower the platform and retract the platform
extension.
2 Remove the platform controls.
3 From inside the platform, remove the two rear
extension deck wire lock pins.
4 From the rear of the extension deck railing, fold
down the front rail assemble. Keep hands free
of pinch points.
5 Replace the two removed pins back into each
side rail bracket.
6 At the rear of the main deck, remove the two
lower wire lock pins.
7 Carefully open the gate and move to the rear
step or the ground.
8 From the rear step or from the ground, fold
down the main deck railing assembly. Keep
hands free of pinch points.
9 Replace the two removed pins back into each
side rail bracket.
Note: To assist in the removal and replacement of
the wire lock pins, pull or push back on the railing
to compress the rubber bumpers.
GS-30 • GS-32 • GS-46
Sixth Edition • First Printing
Part No. 227286

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents