Genie GS-1530 Operator's Manual page 24

Operator's Manual
Controls
Platform Control Panel
1 Thumb rocker switch for steer functions
Press the thumb rocker switch in either
direction to activate steer function.
2 Drive speed button
Press this button to activate the slow or fast
drive function.
3 Drive function select button
Press this button to activate the drive
function.
4 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions. Pull out the red
Emergency Stop button to the on position to
operate the machine.
5 LED
Diagnostic read out, and battery charge
indicator.
6 Lift function select button
Press this button to activate the lift
function.
22
7 Horn Button
Push the horn button and the horn will sound.
Release the horn button and the horn will stop.
8 Proportional control handle and function enable
switch for lift and drive functions.
Lift function: Move the control handle in the
direction indicated by the blue arrow and the
platform will raise. Move the control handle in
the direction indicated by the yellow arrow and
the platform will lower. The descent alarm will
sound while the platform is lowering.
Drive function: Move the control handle in the
direction indicated by the blue arrow on the
control panel and the machine will move in the
direction that the blue arrow points. Move the
control handle in the direction indicated by the
yellow arrow on the control panel and the
machine will move in the direction that the
yellow arrow points.
GS-30 • GS-32 • GS-46
Sixth Edition • First Printing
Part No. 227286