Special Features - Kenwood RDX-VH7 Instruction Manual

Special features

Amplifier designed with emphasis on sound quality (Pure A amplification)
The Pure A class reproduction mode is built in to improve the sound quality during low-level
listening. The sound quality is switched automatically into AB-class as the volume level is de-
creased to ensure transparent, clear sound at all levels.
Free layout
The system components can be installed vertically on the sides (lengthwise) as well as the
conventional, horizontally stacked installation. Much flexible system setting than before is now
possible.
LCD (Liquid Crystal Display) with backlit illumination
A high-definition graphic display on each component shows the operating modes such as CD
playback and tuner reception conditions at a glance. The display orientation can be changed
according to whether the system components are installed vertically or stacked horizontally.
CD player with HDCD (High-Definition
CDs recorded in the HDCD format can be played back with higher resolution and wider dynamic
range. CDs recorded in the normal format can naturally be played back more delicately than
before.
" ,HDCD®, High Definition Compatible Digital
tered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/or other
countries."
CD-TEXT data display
The text data (disc title, track titles) recorded in CDs can be displayed on the LCD.
R.D.S. (Radio Data System) (For U.K. and Europe)
The RDS data included in FM broadcasts can be used to search for the intended broadcasting
contents and for automatic reception from standby.
One-touch operation playback
Even when the power is set to OFF (standby), simply pressing the play key on the front panel of
the CD player, MD recorder or tape deck or the "band" key of the tuner starts playback of the
corresponding source component immediately.
Convenient timer functions
1 O.T.T. timer :
When the set time comes, a source starts to play automatically only for an hour.
2 Program timer for playback (AI timer playback) and timer recording:
Two timer programs (PROG.1 and PROG.2) are available for each of the timer playback (AI
timer playback) and timer recording functions. (When playback is started with the AI timer, the
volume increases automatically until the specified level.)
3 Sleep timer :
When the set time comes, the power of the system is set automatically to OFF (standby).
This is convenient for example when you want to fall asleep while listening to music.
Compatible Digital recording
®
and Pacific Microsonics™ are either regis-
Before applying power
Introduction
RD-VH7/X-VH7 (EN)
) compatibility
7