Kenwood RDX-VH7 Instruction Manual page 39

2
Receive an RDS station.
Press the "4" or "¢" key.
Select a station where
"RDS" and "EON" are lit.
3
Wait for the desired information.
CD or tape playback also may be started.
As long as the power is ON, standby condition
will exist.
TP (Traffic Program) Indication
When the "TP" indication is lit, this indicates that this
station or a station in the same network is transmitting
traffic information.
When "TP" is displayed for the station presently being
received, the traffic information of this station can be
heard even without EON reservation.
P.CALL
TP EON RDS
FM08
"RDS" and "EON" Light
NOWETA 3
ST.
N.B.I
AU TO
TA NEWS
PURE A
÷ When "TA" has been selected in step 1, always select
a station for which the "NOW TA" is display.
÷ When "EON" does not light although an RDS station is
received, that station is not transmitting EON data.
Please select a different station.
When listening to the tuner:
Be sure to stay tuned to stations that display both the
"EON" and "RDS" indicators.
To listen sources other than the tuner:
1.Tune in a station which that displays both the "EON"
and "RDS" indicators, then use the "input" key to
switch the input to the source you desire.
2.Even when the input is set to a source other than tuner,
it will automatically switch to tuner when the desired
EON program starts to broadcast. During this period,
the source selected in step 1 continues playing, but will
not be heard.
3.When reception of the desired EON program is com-
plete, the input returns to the previous input source.
÷ Do not use the EON function during recording.
÷ When the transmission of the selected program con-
tents ends in case of automatic reception with the EON
function, return will be made to the status directly be-
fore operation of the EON function.
39
Using R.D.S.
RD-VH7/X-VH7 (EN)