20
Operation of remote control unit
Loading batteries
1
Remove the cover.
Operation
Plug the power cord into a power outlet and
press the "
POWER" key on the remote con-
trol unit to switch the power ON. Then press the
key of the function you want to control.
÷ When pressing more than one remote control keys
successively, press the keys securely by leaving an
interval of 1 second or more between keys.
1. The provided batteries are intended for use in operation checking, and their service life may be short.
2. When the remote controllable distance becomes short, replace both of the batteries with new ones.
Notes
Notes
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
2
Insert batteries.
÷ Insert two R6 ("AA"-size) batteries
following the polarity indications.
Operating range (approx.)
Controls and indicators
3
Close the cover.
Remote sensor
6m
30˚
30˚
POWER
SLEEP
TIMER
REPEAT
1
2
3
RANDOM
4
5
6
P.MODE
7
8
9
CHECK
+10
0
+100
TAPE
MD
CLEAR
O.T.E.
P.CALL
MUTE
RD-VH7/X-VH7 (EN)