Kenwood RDX-VH7 Instruction Manual page 25

LCD contrast adjustment
The contrast of the LCD display on the amplifier-
tuner/ CD player can be switched as desired.
multi control
mode
\
\
When the LCD display is invisible (due to
too bright contrast), press and hold the
Note Note
"mode" key for more than 2 seconds. This
resets the contrast to the initial value.
LCD display orientation adjustment
The orientation of the LCD window on the ampli-
fier-tuner/ CD player can be set to automatic
switching according to whether it is installed ver-
tically or horizontally (AUTO) or to manual switch-
ing as required by the user (MANUAL).
multi control
mode
\
\
To cancel:
Select the desired switching method using
steps 1 to 3.
Auto Power Save (A.P.S.)
When the power has been left ON for more than
30 minutes while the unit has been doing nei-
ther recording or playback in this period, the
A.P.S. function switches the power OFF
(standby) automatically. Whether the A.P.S.
function is to be used or not can be set with the
following steps.
multi control
mode
\
\
1
Press the "mode" key.
enter
\
\
enter
\
\
enter
\
\
1
Press the "mode" key.
2
Rotate the "multi control" knob to select
"CONTRAST SET ?", then press the "enter"
key.
CONTRAST ?
BALANSETT?
3
Select the desired brightness (display den-
sity) by rotating the "multi control" knob,
then press the "enter" key.
÷ Adjust the contrast when the LCD display is hard
to read due to a problem in the installation posi-
tion or to the ambient temperature condition, etc.
1
Press the "mode" key.
2
Rotate the "multi control" knob to select
"WINDOW SET ?", then press the "enter"
key.
BALANSETT?
3
Select "AUTO" or "MANUAL" by rotating
the "multi control" knob, then press the
"enter" key.
÷ When "MANUAL" is selected, the display orien-
tation can be changed by rotating the "multi con-
trol" knob while "CHANGE ?" is displayed to se-
lect the desired display orientation and pressing
the "enter" key.
2
Rotate the "multi control" key to select
"A.P.S. SET ?", then press the "enter" key.
A.P.S.ST ?
BALANSETT?
3
Select "ON" or "OFF" by rotating the "multi
control" knob, then press the "enter" key.
PROG.1 2
Lights
A.P.S.
TA NEWS
PURE A
÷ With the TUNER and AUX input, A.P.S. functions
only when the volume is set to zero.
÷ The LCD shows "A.P.S." while this function is ac-
tive.
Hearing sound
RD-VH7/X-VH7 (EN)
Blinks
Blinks
Blinks
25