Kenwood RDX-VH7 Instruction Manual page 41

To pause the tape
Cassette deck
Lights
÷ Press the "2 rev" or "3 fwd" key to restart play-
back.
To wind tape at high speed
Cassette deck
direction
Quick blinking
÷ Press the "7 stop" key to stop fast winding.
Selection of reverse mode
Cassette deck
Lights
Each press switch the modes as follows.
""" lit ..... The two sides of tape will be
played back endlessly.
Goes off ..... Tape stops after having played a
single side.
Transport direction indicators
The "2 reverse" and "3 forward" indicators in-
dicate the current direction in which the tape ad-
vances when playback or recording is started au-
tomatically by the easy operation function, etc.
This direction is the direction stored in memory
when the tape was last stopped.
Transport direction indicators
direction
Lights
3 Fast-forward
2 Rewind
rev.mode
Recording onto cassette tape
To stop playback
Cassette deck
÷ The tape direction lights red.
To reduce tape noise
The Dolby Noise Reduction system reduces in-
herent noise to tape playback. This cassette deck
incorporates the C Type Dolby NR in addition to
the standard B Type.
Set the Dolby NR according to the Dolby NR used
when recording each cassette tape.
Cassette deck
Dolby NR
Lights
Each press switch the modes as follows.
"B-type" lit ... Tape is played using B Type.
"C-type" lit ... Tape is played using C Type.
Goes off ......... Dolby NR is deactivated.
Cassette deck
To change the direction, press the key for the de-
sired playback direction, and then press the "7
stop" key.
Playback of tape
RD-VH7/X-VH7 (EN)
(Dolby NR)
Dolby NR
\
\
41