Incoming Call - Mercedes-Benz COMAND Operating Instructions Manual

Using the telephone
132
Select Reception Volume Reception Volume
X
sion Volume sion Volume
Select a volume setting by turning cVd the
X
COMAND controller.
To close the setting scale: press W or
X
slide X V Y.
i
Incorrect settings may have an impact on
the quality of calls.
Using the telephone

Incoming call

Accepting a call
Example: incoming call
To accept: confirm
X
or
Press the 6 button on COMAND or on
X
the multifunction steering wheel.
i
You can also accept the call by voice com-
mand using the Voice Control System (see
the separate operating instructions).
Once you have accepted the call, you can use
hands-free mode.
The call volume can be adjusted (
Other functions during a call (
If the phone number of the caller is transfer-
red, it appears in the display.
If an entry for the caller exists in the phone
book, you will also see the name.
If the phone number is not transferred or the
"Hide data" function is activated,
appears in the display.
or Transmis‐ Transmis‐
and press W to confirm.
Accept Accept by pressing W.
page 30).
Y
page 133)
Y
Unknown Unknown
i You can also accept a call as described
above when another main function is
switched on in COMAND. Once you have
accepted the call, the display switches to
the telephone display. After the call is fin-
ished, you see the display of the previous
main application again.
The display does not switch to telephone
mode if you:
press the % back button next to the
R
COMAND controller and then
accept the call using the 6 button on
R
the multifunction steering wheel
Rejecting a call
To reject: select Reject Reject
X
the COMAND controller and press W to
confirm.
or
Press the ~ button on COMAND or on
X
the multifunction steering wheel.
Making a call
Using the number keypad
Call up the telephone basic menu
X
( page 131).
Y
Enter the digits using the number keypad.
X
To connect the call: press the 6 but-
X
ton on COMAND or on the multifunction
steering wheel.
Using the telephone basic menu
Call up the telephone basic menu
X
( page 131).
Y
Select the digits one by one by turning cVd
X
and sliding ZVÆ the COMAND controller
and press W to confirm.
by turning cVd