Incoming Call - Mercedes-Benz COMAND Operator's Manual

Telephone*
Telephone operation

Incoming call

The system detects an incoming call, the
phone rings.
Incoming calls are indicated in a window in
any system (e.g. radio).
The window shows:
the caller's number if it is transmitted
or
the caller's name if her or his name and
number are saved in the phone book or
Unknown
.
94
Accepting a call
Press k on the COMAND.
or
Press s on the multifunction steer-
ing wheel.
or
accept
Press E to confirm
The display will change to the
call menu ( page 99). In the status
bar, the off-hook symbol will appear.
An active audio source will be muted.
You talk over the hands-free set.
Rejecting a call
Press K on the COMAND.
or
Press t on the multifunction steer-
ing wheel.
or
Push the joystick to H to highlight
ject
and than press E.
i
The window will appear over the Rear
view camera display. After accepting or
rejecting a call, the Rear view camera is
fully visible until deactivated ( page 39).
Setting the volume for hands-free ope-
ration
.
Raising the volume
Turn the rotary control on the e but-
ton to the right.
Lowering the volume
Turn the rotary control on the e but-
ton to the left.
Ending a call
Press K on the COMAND.
or
Press t on the multifunction steer-
ing wheel.
re-
or
Press the
End
soft key.