Mercedes-Benz COMAND Operating Instructions Manual page 130

Telephony via the Bluetooth
128
list. In this case, start a new search to
update the Bluetooth
Authorizing (registering) a mobile
phone
Passkey entry
Telephone basic menu
Option 1: using the passkey (access code)
Select the mobile phone using the Ï
X
symbol in the Bluetooth
turning cVd the COMAND controller and
press W to confirm.
The input menu for the passkey appears.
The passkey is any one to sixteen-digit num-
ber combination which you can choose your-
self. You must enter the same number com-
bination in COMAND and in the Bluetooth
capable mobile phone (see the mobile phone
operating instructions).
i
Some mobile phones require a passkey
with four or more digits.
®
interface
®
telephone list.
®
telephone list by
®
-
i If you want to reauthorize a mobile phone
following deauthorization, you can select a
different passkey.
i
Mercedes-Benz recommends de-authori-
zation in COMAND and on the mobile
phone ( page 130). Subsequent authori-
Y
zation may otherwise fail.
To enter the passkey in COMAND: press
X
the number keys one after the other.
or
Select the digits in the digit bar one by one
X
by turning cVd the COMAND controller
and press W to confirm.
¬ is highlighted after the first number
has been entered.
In both cases, select ¬ and press W to
X
confirm.
To enter the passkey on the mobile
X
phone: if the Bluetooth
cessful, you will be requested to enter the
passkey (access code, passcode; see the
mobile phone operating instructions).
Enter the same passkey in the mobile
X
phone as the one already entered in
COMAND.
The Connecting Bluetooth Pro‐ Connecting Bluetooth Pro‐
files... files... message appears.
The Authorization successful Authorization successful
sage appears once authorization is com-
pleted.
The mobile phone is connected to COMAND
(authorized). You can now make phone calls
using the COMAND hands-free system.
i
After entering the passkey, you may also
need to enter a confirmation in your mobile
phone to connect calls. Please check your
mobile phone display. On some mobile
phones, this confirmation can be saved. In
this case, you do not need to enter it again.
If the COMAND display shows the
ization failed ization failed message, you may have
exceeded the prescribed time period.
Repeat the procedure.
®
connection is suc-
mes-
Author‐ Author‐