Mercedes-Benz COMAND Operating Instructions Manual page 56

Seat functions
54
This function allows you to adjust the air
cushions in the seat side bolsters.
Select the seat (
X
Select Seat Sides Seat Sides
X
COMAND controller and press W to con-
firm.
A scale appears.
Turn cVd or slide ZVÆ the COMAND con-
X
troller and press W to confirm.
To exit the menu: press the k back
X
button.
Balance
The availability of this function depends on
the vehicle model series.
The Balance function controls the distribution
of heat on the seat backrest and cushion.
The Balance function influences the currently
set heating level of the seat heating; see the
separate vehicle Operator's Manual.
Select the seat (
X
Select Balance Balance
X
COMAND controller and press W to con-
firm.
A scale appears and shows the current set-
ting. Positive values indicate the heat out-
put for the seat backrest, negative values
indicate the heat output for the seat cush-
ion. The intensity is indicated by an orange
bar in the stylized seat above the scale.
page 52).
Y
by turning cVd the
page 52).
Y
by turning cVd the
The values stand for:
0 0 - backrest and seat cushion are heated
R
equally to the maximum level
1 1 to 3 3 - the heat output to the seat cush-
R
ion is reduced in one-third increments
-1 -1 to -3 -3 - the heat output to the backrest
R
is reduced in one-third increments
Turn cVd or slide XVY the COMAND con-
X
troller and press W to confirm.
To exit the menu: press the k back
X
button.
Massage function
The availability of this function depends on
the type of seat and the vehicle model series.
Example display (M-Class or GL-Class)
Select the seat ( page 52).
X
Y
Select Massage Massage by turning cVd the
X
COMAND controller and press W to con-
firm.
A list appears.
You can select different types of massage
function:
0: Off 0: Off
R
1: Slow and Gentle 1: Slow and Gentle
R
2: Slow and Vigorous 2: Slow and Vigorous
R
3: Fast and Gentle 3: Fast and Gentle
R
4: Fast and Vigorous 4: Fast and Vigorous
R