Setting Access Data (Canada Only); Online And Internet Functions - Mercedes-Benz COMAND Operating Instructions Manual

i The availability of individual Mercedes-
Benz Apps may vary depending on the
country.
i
The terms of use are shown when
COMAND is used for the first time and then
once a year thereafter. Only read and
accept the terms of use when the vehicle is
stationary.
i
Internet pages cannot be shown on the
driver's side while the vehicle is in motion.
Connection difficulties while the vehi-
cle is in motion (Canada only)
The following could be the cause of call dis-
connection:
insufficient GSM/UMTS network coverage
R
the vehicle has moved into a GSM cell with
R
no free channels
the SIM card used is not compatible with
R
the network available
you are using a mobile phone with "Twin-
R
card" and the mobile phone with the sec-
ond SIM card is logged into the network at
the same time
Function restrictions (Canada only)
You will not be able to use the mobile phone,
will no longer be able to use the mobile phone,
or you may have to wait before using it, in the
following situations:
when the mobile phone is switched off
R
®
if the Bluetooth function is switched off in
R
COMAND
®
if the Bluetooth function is switched off on
R
the mobile phone while you are using Blue-
®
tooth interface telephony
if the mobile phone has not logged on to a
R
mobile phone network
if neither the mobile phone network nor the
R
mobile phone allow simultaneous use of a
phone and an Internet connection

Setting access data (Canada only)

i It is possible that you may not be able to
receive calls when an Internet connection
is active. This depends on the mobile phone
and the mobile phone network used.
Roaming (Canada only)
When you are driving your vehicle in a differ-
ent country and using COMAND and Internet
functions, additional costs may be incurred
(roaming fees). When you are in a different
country, your SIM card must be enabled for
data roaming. If your mobile phone network
provider does not have a data roaming agree-
ment with the roaming partner, it may not be
possible to establish an Internet connection.
Deactivate this function on your mobile
phone if you want to avoid data roaming when
you are in a different country.
Setting access data (Canada only)
Introduction
To use online and Internet functions, you
need Internet access data for the connected
mobile phone. You can obtain this from your
mobile phone network provider.
A selected/manually set mobile phone net-
work provider is only valid for the mobile
phone connected when the selection/setting
is made. The mobile phone network provider
is set automatically upon reconnection.
i
When you are driving your vehicle in a dif-
ferent country and using the online and
Internet functions on COMAND, you may
incur additional costs (roaming fees).
i
While initializing the mobile phone for the
Internet connection, access data which is
already on the mobile phone may be over-
written. You should therefore check the
settings on the mobile phone (see the
mobile phone operating instructions).
i Adjust the access data settings when the
vehicle is stationary. You may otherwise be
159
Z