Mercedes-Benz COMAND Operating Instructions Manual page 76

Destination entry
74
Select the category or
X
cVd the COMAND controller and press W
to confirm.
After selecting a category, the POIs which
are available along the route and in the
vicinity are displayed.
COMAND first searches for destinations
along the route. Searching for destinations
then continues within a radius of approx-
imately 60 miles (100 km) of the vehicle
position.
After selecting
X
destination entry options from the list.
Selection
Address Entry Address Entry
From Memory From Memory
From Last Desti‐ From Last Desti‐
nations nations
From POIs From POIs
From Personal From Personal
POIs POIs
Other Other by turning
Other, select one of the Other
Step
Enter a destina-
X
tion by address
( page 63).
Y
Select a destina-
X
tion from the des-
tination memory
( page 70).
Y
Select a destina-
X
tion from the list
of last destina-
tions ( page 70).
Y
Select a point of
X
interest
( page 76).
Y
Enter a destina-
X
tion from the per-
sonal POIs
( page 85).
Y
Selection
Using the Map Using the Map
Using Geo-Coor‐ Using Geo-Coor‐
dinates dinates
Select POI and press W to confirm.
X
After selecting a POI or entering a destina-
tion, the address of the way point is dis-
played.
After entering a destination using the map,
the address entry menu is displayed.
highlighted.
To accept the way point: confirm
X
pressing W.
Once you have accepted the way point, it is
entered in the way point menu.
Step
Enter a destina-
X
tion using the map
( page 71).
Y
Enter a destina-
X
tion using the geo-
coordinates
( page 72).
Y
OK OK is
OK OK by