Selecting The Area For The Weather Forecast; Current Position - Mercedes-Benz COMAND Operating Instructions Manual

Selecting the area for the weather forecast

260
i COMAND receives weather forecast data
from the nearest weather station at the
selected location.
Selecting the location in the informa-
tion chart
"Selecting the area for the weather forecast" menu
Select Position Position
X
by turning cVd the COMAND controller
and press W to confirm.
A menu appears.
To select the current vehicle position:
X
confirm

Current Position

Current
pressing W.
COMAND receives the weather data for the
current vehicle position from the nearest
weather station and displays it automati-
cally.
To select the vicinity of the destination:
X
select Near Destination Near Destination
turning c V d the COMAND controller and
press W to confirm.
i You can select
a route has been calculated (
The menu item is otherwise grayed out.
in the information chart
Position in the menu by
in the menu by
Near Destination Near Destination once
page 69).
Y
Selecting a state (searching for winter sport areas)
To select a winter sports area: select
X
Winter Sports Areas Winter Sports Areas
press W to confirm.
Select a state, e.g.
X
to confirm.
Select a winter sports area from the menu
X
and press W to confirm.
The weather data and other information is
displayed for the winter sports area that
has been selected. The data is supplied by
the nearest weather station.
The information chart shows the following
information (if available):
ski slopes/ski lifts
R
snowboarding and nighttime opening
R
snow conditions (e.g. snow depth)
R
temperature
R
In In
in the menu and
Colorado Colorado and press W