Additional Settings; List Of Areas - Mercedes-Benz COMAND Operating Instructions Manual

Defining an area for the first time
To switch to navigation mode: press the
X
Ø button.
To show the menu: press W the COMAND
X
controller.
Select Navi Navi in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Select Avoid Area Avoid Area
X
firm.
If you have not previously blocked an area,
a menu appears.
Select Using Using Map Map,
X
Personal POIs Personal POIs and press W to confirm.
If you select Using Using Map
crosshair appears.
If you select From Memory From Memory
sonal sonal POIs POIs, either the destination mem-
ory or the list of categories for POIs
appears.
Destination memory (
R
List of categories for personal POIs
R
( page 85)
Y
Select the desired destination or personal
X
POI and press W to confirm.
When the destination address is displayed,
X
select Continue Continue and press W to confirm.
The map appears.
The crosshair marks the center of the area
that is to be avoided.
To scroll the weather map: slide XVY,
X
ZVÆ or aVb the COMAND controller.
and press W to con-
From Memory From Memory or From From
Map, the map with the
or From Per‐ From Per‐
page 70)
Y

Additional settings

To set the map scale: as soon as you turn
X
cVd the COMAND controller, the scale bar
appears. Turning clockwise zooms out from
the map; turning counter-clockwise zooms
in.
Turn cVd until the desired scale is set.
X
To apply a block: press W the COMAND
X
controller.
A red square appears on the map.
To adjust the size of the square: turn
X
cVd the COMAND controller.
The square is enlarged or reduced.
To confirm the settings: press W.
X
The list appears. The previously selected
area to be avoided has been added and
activated.
You can also determine additional areas to be
avoided ( page 115).
Y
Defining further areas
To switch to navigation mode: press the
X
Ø button.
To show the menu: press W the COMAND
X
controller.
Select Navi Navi in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Select Avoid Area Avoid Area
X
firm.
If you have already selected one or more
areas to avoid, a list of areas appears.
and press W to con-
Z
115