Samsung SNP-6200 User Manual page 86

setup screen
exposure Setup
You can adjust the exposure level of the camera.
1. Select <exposure>.
2. Select each item and set it properly.
• Brightness : Adjust the screen
brightness.
• Shutter mode : Adjust the electronic
shutter of the camera.
- ESC (Electronic shutter control)
: Adjust the shutter speed
automatically according to the
ambient brightness.
- Manual : Adjust the shutter speed
of the camera manually.
- A.FLK (Anti flicker) : Select this feature if you encounter a flickering screen due
to a frequency mismatch with the ambient lighting.
Sens-up can be used only when the shutter type is <ESC>, and cannot be used when it is
`
<Manual> or <A.FLK>. But Sens-up can be used regardless of shutter type when WDR mode
is used. (apart from the influence of AGC)
The shutter cannot be used if the backlight compensation is set to WDR mode.
`
• Shutter speed : Control the shutter speed manually.
• SSNR3 : Specify the use of noise reduction.
SSNR3 mode cannot be used if the AGC mode is set to <Off> or <Manual>.
`
• Sens-up mode : Automatically senses the darkness level at night or in a low
contrast scene and extends the accumulation time accordingly for a bright and
sharp image.
Sens-up can be used only when the shutter type is <ESC>.
`
Sens-up mode cannot be used if the AGC mode is set to <Off> or <Manual>.
`
The greater the video accumulation factor is, the brighter the screen is but the afterimage of a
`
moving object grows accordingly and the Auto Focus mode may not operate properly.
If the gain is not used, Sens-up will be disabled.
`
• Sens-up limit : Set the work condition to Auto mode in a low contrast scene.
• Iris : You can set the camera iris to Auto or Manual to your preference.
- Auto : Automatically sets the iris adaptively to the ambient lighting and shutter
speed.
- Manual : Iris F-No is set manually.
86_ setup screen