Installation; Preparing Adapter And Cable - Samsung SNP-6200 User Manual

inStaLLation

preparing Adapter and Cable

Connect the camera to the power adaptor. Then, plug the power cord of the adaptor to the wall
`
J
outlet.
Check out the rated voltage and current before making connections.
Rated Power
AC 24V
If applied with both PoE+ and AC 24V power supplies, the device is powered from the first
`
J
engaged supply.
-
It is preferred to use single power supply of either one of PoE+ and AC 24V.
If connected to a switch device that provides PoE+ power, you don't need to apply a power source
`
of AC 24V supply.
Make sure the PoE device suffices PoE+ (IEEE 802.3at) specifications.
`
-
If connecting to the PoE device of IEEE 802.3af standard, set the 'Do not use PoE' of the switch
device.
For further information on switch device, refer to the manufacturer's manual.
The PoE switch model (for each channel) and PoE connection time can differ according to the
`
manufacturer.
AXICOM
IMO3
5VDC
AXICOM
IMO3
5VDC
AXICOM
IMO3
5VDC
IN1 IN2 GND IN3 IN4 GND 1C0M 1.N0 1.NC 2C0M 2.N0 2.NC
Allowable Input Voltage
AC 22V ~ 26V
Current Consumption
2.5 A
English _29