Samsung SNP-6200 User Manual page 103

va / mD
This can be set to generate an event signal when a motion or intelligent video analysis event
is detected.
1. From the Setup menu, select the
<event ( )> tab.
2. Click <va / mD>.
DIS cannot be used if VA/MD is used.
`
J
` to use motion detection (mD)
1. Select a motion detection mode.
2. Set <motion Detection function> to
<enable>.
3. Select a sensitivity level of the motion
detection.
Higher the sensitivity is, the smaller
motion is detected.
4. Use the drag-and-drop method to
specify the detection area on the video.
5. Specify the activation time and
activation condition.
For more information about <Activation time> and <Action>, refer to "Alarm input". (page 102)
`
6. When done, click [apply ( )].
English _103