Samsung SNP-6200 User Manual page 107

to set virtual line based rule
1. Set <iv analysis function> to
<enable>.
2. Set the type to <Line/area/
tampering(Scene change)>.
The virtual line based rules can be specified
`
only if the intelligence video analysis type
is set to <Line/Area/Tampering(Scene
Change)>.
3. Set the event rule to <virtual line based
rules>.
4. Click on both starting and ending points for the line on the screen to display the popup
dialog.
5. Select a desired <virtual Line Based rules>.
• Right : A movement from left to right in the virtual line will be detected.
• Left : A movement from right to left in the virtual line will be detected.
• Both : A movement in any direction in the virtual line will be detected.
6. Click [oK].
To cancel the specified line, hover the mouse over the line and right-click to display
the context menu. Select [Delete] or [clear (
7. When done, click [apply (
to set defined area based rule
1. Set <iv analysis function> to
<enable>.
2. Set the type to <Line/area/
tampering(Scene change)>.
3. Set the event rule to <Defined area
based rules>.
4. Click a corner point of a desired area in
the video to display the popup window.
)].
)].
English _107