Samsung SNP-6200 User Manual page 108

setup screen
5. Select a desired <Defined area Based rules>.
• Entering : This event rule detects an event of object's center entering into the
defined area from outside through the boundary of the area.
• Exiting : This event rule detects an event of object's center exits from the inside of
the defined area through the boundary of the area.
6. Click [oK].
To cancel the specified area, hover the mouse over the area and right-click to display
the context menu. Select [Delete] or [clear (
7. When done, click [apply (
to set entire area based rule
1. Set <iv analysis function> to
<enable>.
2. Set the type to <Line/area/
tampering(Scene change) >.
3. If you set the event rule to <entire
area based rules>, this will display the
popup window.
4. Select a desired <entire area Based
rules>.
• Scene Change : An event where the
screen is changed at more than a certain time interval will be detected.
Detecting a scene change may take a while from the actual change.
`
For stability purposes, the operation pauses for a short period when a scene change event occurs,
`
and no other detection instance of events (including scene change) functions within the duration.
Detection performance may drop under circumstances such as monotonous background, night or
`
low lighting.
5. Click [oK].
To cancel the existing area, right-click on the Entire area to display the popup dialog
and select [Delete] in the context menu.
6. When done, click [apply (
108_ setup screen
)].
)].
)].