Samsung SNP-6200 User Manual page 76

setup screen
To add a preset
1. Select the preset number to add.
2. Set the name for the preset.
3. Press the [
To delete a preset
1. Select the preset number to delete.
2. Press the [
To move to a desired preset
1. Select a preset number that you want to move.
2. Press the [
To configure the detailed settings for the preset
1. Select the number of preset that you
want to configure.
2. Press [
editing mode.
• No.XX : Display the number of the
selected preset.
• Preset edit : You can change the
camera settings according to the
selected preset.
For more information about the
preset editing, refer to "camera
Setup". (page 82)
<After action> in Special determines whether
`
the preset will be automatically run.
• Video analysis : Analyze the video of
the selected preset.
For details about the video analysis, refer to "va / mD". (page 103)
3. When done, click [apply (
4. Press [
After saving the preset, make sure to close preset editing mode by clicking [
`
J
"Back" button of the browser. If you change the settings of other camera while the window is still
open, this may cause an error.
76_ setup screen
] button.
] button.
] button.
] to enter the preset
] to return to the PTZ setup screen.
)].
] button or