setup screen
network disconnect
This can be set to generate an event signal when the physical network connection is cut
off.
1. From the Setup menu, select the
<event (
2. Click <network disconnect>.
3. Specify the use of "Network
disconnect".
4. Specify the activation time and
activation condition.
For more information about <Activation
`
time> and <Action>, refer to "Alarm input".
(page 102)
5. When done, click [apply (
SyStem Setup
product information
1. From the Setup menu, select the
<System (
2. Click <product information>.
3. Check the camera information, or
provide details according to your
network environment.
• Model : Model name of the product.
• Serial number : Product serial
number.
• Device name : Provide a device name that will be displayed on the Live screen.
• Location : Specify the location where the camera is installed.
• Description : Provide detailed
information about the camera location.
• Memo : Provide an explanation about the camera for better understanding.
• Language : Select a preferred language for the Web Viewer OSD.
The default language is set to <English>.
M
`
4. When done, click [apply (
112_ setup screen
)> tab.
)> tab.
)].
)].