Street Trim Panel Installation - Victory 8-Ball Rider's Manual

08 Maintenance.fm Page 207 Monday, May 11, 2009 2:03 PM

Street Trim Panel Installation

1. Remove the seat, license plate and bracket.
2. Working from top to bottom, lift each edge of the tail molding to release the tabs. Lift the
tail molding just enough to provide clearance to install the trim panel.
3. Remove the trunk.
4. Align the trim panel and press downward evenly to seat all four tabs in the tab slots.
5. Align the tail molding. Working from bottom to top, press at each tab to secure the mold-
ing.
6. Reinstall the license plate and seat. Tighten the fasteners.
Torque: 36 in-lbs (4 Nm)
Maintenance
207