08 Maintenance.fm Page 171 Monday, May 11, 2009 2:03 PM
Throttle Control Inspection
1. With the engine OFF, rotate the throttle control
grip fully open and then release it. It should
rotate smoothly from the rest position to the
completely open position. It should return to the
rest position quickly when released.
2. Repeat the twist and release process with the
handlebars turned fully right and fully left.
3. Remove the right side access cover.
4. Inspect throttle cables for frayed ends.
5. Service the throttle system if throttle operation
is not smooth, if throttle grip does not return
properly, or if cable ends are frayed. See the
VICTORY Service Manual or your authorized
VICTORY dealer.
Maintenance
Cable Area
171