Victory 8-Ball Rider's Manual page 305

9922441.book Page 301 Monday, May 11, 2009 1:16 PM
Input Cable Setup
To change an input cable:
1. Open the left console storage bin.
2. Locate the input cable and sealing
grommet at the bottom of the bin.
3. Carefully pull the cable inside the bin.
4. Disconnect the cable from the harness
by carefully pushing up on the green
tab. DO NOT ALLOW THE HAR-
NESS TO DROP BACK THROUGH
THE HOLE.
5. Install the desired input cable.
6. Carefully
push the
sealing
grommet
back into
the hole.
AUX / iPod
AUX Input
Cable
301