08 Maintenance.fm Page 146 Monday, May 11, 2009 2:03 PM
Maintenance
Engine Oil / Filter Change
Change the engine oil at the intervals specified in the
periodic maintenance table beginning on page 137.
1. Start the engine and allow it to idle for several min-
utes. Stop the engine.
Tip: The engine must be at normal operating temperature
before changing the oil.
CAUTION! Hot engine and exhaust components can cause
burns to skin and can ignite a fire if exposed to flammable
materials. Always park the motorcycle clear of flammable
materials and where people are not likely to contact hot
components.
2. Position the motorcycle securely on the sidestand.
3. Place a drain pan under the drain plug and oil filter. Remove the drain plug and seal.
Allow the oil to drain completely.
Tool: 6 mm Allen wrench
4. Slowly loosen the oil filter. Allow the oil to drain completely.
Tool: 2 1/2 inch (63.5 mm) oil filter wrench
146
Oil Filter
Drain Plug