9922441.book Page 113 Monday, May 11, 2009 1:16 PM
Operation
Priming the Fuel System
If the motorcycle runs out of fuel, prime the fuel system before attempting to restart the
engine.
1. Fill the fuel tank.
2. Turn the ignition key to the ON position.
3. Move the engine stop/run switch from the STOP position to the RUN position.
4. Allow the fuel pump to run until it stops (about 3 seconds).
5. Move the engine stop/run switch to the STOP position and wait 10 seconds.
6. Repeat steps 3-5 four to five times.
7. Turn the key to the OFF position.
8. Start the engine. See page 114.
113