Victory 8-Ball Rider's Manual page 64

9922441.book Page 60 Monday, May 11, 2009 1:16 PM
Instruments/Features/Controls
Multi-Function Display
Clock
Tip: The clock must be reset any time the battery has been disconnected or discharged.
1. Turn the key to ON or ACC. Use the mode button to toggle to the odometer display.
Tip: If LOW FUEL is flashing, the display will not enter the CLOCK SET mode.
2. Press and hold the mode button until the hour segment flashes. Release the button.
3. With the segment flashing, tap the mode button to advance to the desired setting.
4. Press and hold the mode button until the next segment flashes. Release the button.
5. Repeat steps 3-4 twice to set the 10-minute and 1-minute segments. After completing the
1-minute segment, step 4 will save the new settings and exit the clock mode.
6. Turn the key to the OFF position.
60