Victory 8-Ball Rider's Manual page 215

08 Maintenance.fm Page 211 Monday, May 11, 2009 2:03 PM
Taillight / Brake Light / Turn Signal Bulb Replacement
4. Remove the six button-head screws from the lower rear
bumper. Remove the five button-head screws that secure
the taillight lenses.
Tool: 4 mm Allen wrench
5. Pull both taillights straight rearward to release all spring
tabs from the rear fender and expose the bulb socket.
Make a note of bulb socket orientation for reassembly.
6. Rotate the socket 1/4 turn counter-clockwise to remove it.
Pull the bulb straight out of the socket and install a new
bulb.
7. Reverse all steps to reassemble components. Tighten the
button-head screws.
Torque: 36 in-lbs(4 Nm)
Maintenance
Screws
Screws
Screws
Socket
211