Value Range
Default Value
Configuration File Reference
STUN Server Port
Description
Value Range
Default Value
Configuration File Reference
3.4.5 Static NAPT Settings
This screen allows you to configure the NAPT (Network Address Port Translation) settings. If the unit is
connected behind a router that uses NAT/NAPT to translate private IP addresses, global IP addresses, VoIP
packets might be blocked by the router, depending on the SIP server. To avoid this problem, this setting is
required. For details, see 1.1.10.2 NAT (Network Address Translation) Setup.
Document Version
2011-01
Max. 127 characters
Not stored.
STUN_SERV_ADDR (Page 162)
Specifies the port number of the STUN server.
1–65535
3478
STUN_SERV_PORT (Page 163)
3.4.5 Static NAPT Settings
Administrator Guide
73