Unique ID of Shared Call
Description
Value Range
Default Value
Configuration File Reference
Synchronize Do Not Disturb and Call Forward
Description
Value Range
Default Value
Configuration File Reference
3.7.3.2 Dial Plan
Dial Plan
Description
Value Range
Default Value
Configuration File Reference
Document Version
2011-01
Specifies the unique ID used by the SIP server when [Enable Shared
Call] is set to [Yes].
Max. 24 characters
Not stored.
SHARED_USER_ID_[1–8] (Page 182)
Selects whether to synchronize the Do Not Disturb and Call Forward
settings, configured via the Web user interface or phone user interface,
between the unit and the portal server that is provided by your phone
system dealer.
Note
•
Even if you select [Yes], this feature may not function properly
if your phone system does not support it. Before you configure
this setting, consult your phone system dealer.
•
You cannot set both [Enable Shared Call] and [Synchronize
Do Not Disturb and Call Forward] to [Yes] at the same time.
•
Yes
•
No
No
SYNCHRONIZATION_ENABLE_[1–8] (Page 183)
Specifies a dial format, such as specific phone numbers, that control
which numbers can be dialed or how to handle the call when making a
call. For details, see 5.3 Dial Plan.
Max. 500 characters
Note
•
Entering more than 500 characters in this field causes an error
and the previous value remains effective.
Not stored.
DIAL_PLAN_[1–8] (Page 181)
3.7.3 Call Control [Line 1]–[Line 8]
Administrator Guide
109