Cyclic Auto Resync; Resync Interval; Header Value For Resync Event; Reset To Defaults - Panasonic KX-TGP500 Administrator's Manual

Configuration File Reference

Cyclic Auto Resync

Description
Value Range
Default Value
Configuration File Reference

Resync Interval

Description
Value Range
Default Value
Configuration File Reference

Header Value for Resync Event

Description
Value Range
Default Value
Configuration File Reference

3.8.4 Reset to Defaults

This screen allows you to reset the settings made through the Web user interface to their default values by
clicking [Reset Web Settings]. After you click this button, a dialog box is displayed, asking whether you want
to reset the settings. Click OK to reset, or Cancel not to. For details about the reset, see 1.2.1.2 Resetting
the Settings Made through the Web User Interface (Reset Web Settings).
Document Version 2011-01
CFG_MASTER_FILE_PATH (Page 149)
Selects whether the unit periodically checks for updates of configuration
files.
•
Yes
•
No
No
CFG_CYCLIC (Page 151)
Specifies the interval, in minutes, between periodic checks for updates
of the configuration files.
1–40320
10080
CFG_CYCLIC_INTVL (Page 152)
Specifies the value of the "Event" header sent from the SIP server to
the unit so that the unit can access the configuration files on the
provisioning server.
Max. 15 characters
Note
•
If the value for this setting is any value other than an empty
string (typically "check-sync" or "resync" is set), the unit will
access the configuration files on the provisioning server when
the SIP server sends an event to notify the unit.
If the value for this setting is an empty string, the unit will not
access the configuration files on the provisioning server even if
the unit receives a synchronization notification of an event.
check-sync
CFG_RESYNC_FROM_SIP (Page 153)
3.8.4 Reset to Defaults
Administrator Guide 125