3.7.2 Call Control
Line No.
Description
Value Range
Default Value
Configuration File Reference
Default
Description
Value Range
Default Value
Configuration File Reference
3.7.2 Call Control
This screen allows you to configure various call features that are common to all lines.
104
Administrator Guide
Selects which lines (1–8) can be seized when going off-hook to make
a call for the base unit and each handset.
Selected, Not selected
Note
•
If you clear all the check boxes for the base unit and the
handsets, calls cannot be made from either the base unit or the
handsets.
Selected (all)
•
OUTGOING_CALL_LINE_HS[1–6] (Page 165)
•
OUTGOING_CALL_LINE_BS (Page 165)
Selects which line to seize automatically when going off-hook to make
a call for the base unit and each handset.
Note
•
If the line selected as [Default] is not selected as a line that can
be seized for the corresponding base unit or handset in [Line
No.], the unit cannot make a call.
1–8
1
•
DEFAULT_LINE_SELECT_HS[1–6] (Page 165)
•
DEFAULT_LINE_SELECT_BS (Page 166)
Document Version
2011-01