Entering Characters; Result Messages - Panasonic KX-TGP500 Administrator's Manual

Button
Refresh

Entering Characters

In the Web user interface, when specifying a name, message, password, or other text item, you can enter any
of the ASCII characters displayed in the following table with a white background.
However, there are additional limitations for certain types of fields as follows:
•
Number field
–
You may only enter a sequence of numeric characters.
–
You cannot leave the field empty.
•
IP Address field
–
You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
–
You cannot enter invalid IP addresses, for example, "0.0.0.0", "255.255.255.255", or "127.0.0.1".
•
FQDN field
–
The field cannot contain ", &, ', <, >, or trailing spaces.
–
You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
–
You cannot enter invalid IP addresses, for example, "0.0.0.0", "255.255.255.255", or "127.0.0.1".
•
Authentication ID/Password field
–
The field cannot contain ", &, ', :, <, >, or space.
–
The length of user password and administrator password must be from 6 to 16 characters.
•
Display Name field (® see [Display Name] in 3.7.3.1 Call Control)
–
This is the only field in which you can enter Unicode characters.

Result Messages

When you click [Save] after changing the settings on the current configuration screen, one of the following
messages will appear in the upper-left area of the current configuration screen:
Document Version 2011-01
Updates the status information displayed on the screen. This button is
displayed in the upper-right area of the [Network Status] and [VoIP Status]
screens.
3.2.2 Accessing the Web User Interface
Function
Administrator Guide 55