Telephone-Event Payload Type; Call Hold; Supports Rfc 2543 (C=0.0.0.0); Codec Settings - Panasonic KX-TGP500 Administrator's Manual

3.6.4 VoIP Settings [Line 1]–[Line 8]
Value Range
Default Value
Configuration File Reference

Telephone-event Payload Type

Description
Value Range
Default Value
Configuration File Reference

3.6.4.5 Call Hold

Supports RFC 2543 (c=0.0.0.0)

Description
Value Range
Default Value
Configuration File Reference

3.6.4.6 CODEC Settings

First CODEC

Description
98 Administrator Guide
•
Outband
•
Inband
Note
•
If you select [Outband], DTMF tones will be sent through SDP
(Session Description Protocol), compliant with RFC 2833. If you
select [Inband], DTMF tones will be encoded in the RTP
stream.
Outband
OUTBANDDTMF_[1–8] (Page 179)
Specifies the RFC 2833 payload type for DTMF tones.
Note
•
This setting is available only when [DTMF Type] is set to
[Outband].
96–127
101
TELEVENT_PTYPE_[1–8] (Page 180)
Selects whether to enable the RFC 2543 Call Hold feature on this line.
•
Yes
•
No
Note
•
If you select [Yes], the "c=0.0.0.0" syntax will be set in SDP
when sending a re-INVITE message to hold the call. If you
select [No], the "c=x.x.x.x" syntax will be set in SDP.
Yes
RFC2543_HOLD_ENABLE_[1–8] (Page 180)
Selects which codec to assign the highest priority to.
Document Version 2011-01