Value Range
Default Value
Configuration File Reference
Minimum Delay
Description
Value Range
Default Value
Configuration File Reference
Initial Delay
Description
Value Range
Default Value
Configuration File Reference
3.6.4.4 DTMF
DTMF Type
Description
Document Version
2011-01
3–50 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than [Initial Delay]
–
This value must be greater than [Minimum Delay]
–
[Initial Delay] must be greater than or equal to [Minimum
Delay]
20 (´ 10 ms)
MAX_DELAY_[1–8] (Page 177)
Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
1 or 2 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to [Initial Delay]
–
This value must be less than [Maximum Delay]
–
[Maximum Delay] must be greater than [Initial Delay]
2 (´ 10 ms)
MIN_DELAY_[1–8] (Page 177)
Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
1–7 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than or equal to [Minimum
Delay]
–
This value must be less than [Maximum Delay]
2 (´ 10 ms)
NOM_DELAY_[1–8] (Page 178)
Selects the method for transmitting DTMF (Dual Tone Multi-Frequency)
tones.
3.6.4 VoIP Settings [Line 1]–[Line 8]
Administrator Guide
97