3.5.2 Administrator Password
3.5.2 Administrator Password
This screen allows you to change the password used to authenticate the Administrator account when logging
in to the Web user interface.
Note
•
For security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
•
After you change the administrator password, the next time you access the Web user interface, the
authentication dialog box appears. 2 consecutive login failures will result in an error ("401
Unauthorized"). This restriction only applies the first time you attempt to log in after changing the
password. In all other circumstances, an error occurs after 3 unsuccessful login attempts.
3.5.2.1 Change Administrator Password
New Password
Description
Value Range
Default Value
Configuration File Reference
Confirm New Password
Description
Value Range
Default Value
Configuration File Reference
76
Administrator Guide
Specifies the password to use to authenticate the Administrator account
when logging in to the Web user interface.
6–16 characters (except ", &, ', :, <, >, and space)
adminpass
ADMIN_PASS (Page 137)
Specifies the same password that you entered in [New Password] for
confirmation.
6–16 characters (except ", &, ', :, <, >, and space)
Note
•
This value must be the same as the value entered in [New
Password].
adminpass
ADMIN_PASS (Page 137)
Document Version
2011-01