Stun Server Port; Static Napt Settings - Panasonic KX-TGP500B04 Administrator's Manual

Value Range
Default Value
Configuration File Reference

STUN Server Port

Description
Value Range
Default Value
Configuration File Reference

3.4.5 Static NAPT Settings

This screen allows you to configure the NAPT (Network Address Port Translation) settings. If the unit is
connected behind a router that uses NAT/NAPT to translate private IP addresses, global IP addresses, VoIP
packets might be blocked by the router, depending on the SIP server. To avoid this problem, this setting is
required. For details, see 1.1.10.2 NAT (Network Address Translation) Setup.
Document Version 2010-08
Max. 127 characters
Not stored.
STUN_SERV_ADDR (Page 161)
Specifies the port number of the STUN server.
1–65535
3478
STUN_SERV_PORT (Page 161)
3.4.5 Static NAPT Settings
Administrator Guide 73