Entering Characters
You can enter characters and digits using the dial keys.
You can select one of 3 character modes by pressing the Right Soft Key while entering
a name. The function icon above the soft key displays the current character mode.
For a list of available characters, see "Character Mode Table (Page 42)".
To change the character mode while editing a name in the phonebook, press the
right soft key.
Example: To enter "Anne" in Alphabetic Mode.
•
To switch between uppercase and lowercase, press
•
To enter a character located on the same dialing key as the previous character, move the cursor by pressing
the Navigator Key [ ], then enter the desired character.
•
If you enter a different character by mistake, press the Navigator Key [ ] or [ ] to highlight the character,
press
to delete it, and then enter the correct character.
•
To clear an entire line, press
•
To move the cursor, press the Navigator Key [ ], [ ], [ ] or [ ].
Document Version 2013-03
Alphabetic
(RIGHT)
for more than 1 second.
Numeric
(RIGHT)
.
Customizing the Telephone
Extended 1
(RIGHT)
Operating Instructions
A, a
B, b
C, c
41