TG6500C_Preparation.fm Page 25 Thursday, September 30, 2004 4:54 PM
Auto Talk
Handset
The Auto Talk feature allows you to answer calls by simply lifting the handset off the
base unit (or the charger, for accessory handset users, p. 3). You do not need to
press [C] or [s]. The factory preset is OFF.
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Auto talk" by pressing [d] or
[B], then press the soft key (
4
Select "On" or "Off" by pressing [d] or [B].
5
Press the soft key (
• In order to view caller information after you lift the handset to answer a call, leave
the Auto Talk feature turned off.
• If you change the line selection feature from "Auto" to "Line 1" or "Line 2" (p. 70),
the Auto Talk feature will function for that line only. If the other line receives a call,
the Auto Talk feature will not function.
LCD Contrast
There are 6 levels of LCD contrast. The factory preset is "level 3".
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "LCD contrast" by pressing [d] or
[B], then press the soft key (
4
Select the desired contrast by pressing [d]
or [B].
• The contrast will change.
• The number of steps indicates the contrast level.
5
Press the soft key (
Programmable Settings
SELECT
).
SELECT
), then press [OFF].
SAVE
Handset
SELECT
).
SELECT
), then press [OFF].
SAVE
Initial setting
).
Auto talk
Auto talk
:Off
Initial setting
).
LCD contrast
e.g. Level 3
LCD contrast
Low
High
25