Table of Contents
Advertisement
Other Features and Settings
Phone number conversion codes
If you store phone numbers in your contacts using "+" and the country code, store the following
codes in the base unit so that phone numbers will be dialed correctly.
1
Tap [Landline] in the home screen or app list.
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Tap [Phone number conversion].
4
Select a code to edit, enter the code (4 digits max.) and then tap [OK].
– [International code]: This is the international dialing prefix that you need to dial when
dialing international phone numbers manually.
– [Country code]: This is the country code required when calling your country from
overseas.
– [National access code]: If you store domestic phone numbers in your handset using "+"
and the country code, this is the number that should replace the country code when
calling domestically.
Flash time
1
Tap [Landline] in the home screen or app list.
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Tap [Set flash time].
4
Select the desired setting.
Line mode
Generally this setting should not be changed. This setting automatically maintains receiver
volume at the proper level depending on the current telephone line condition. Set the line mode
to [A] if the telephone line condition is not good.
1
Tap [Landline] in the home screen or app list.
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Tap [Set line mode].
4
Select the desired setting.
Tone/pulse setting
This setting must be set to match the dialing mode of your phone service, otherwise you will not
be able to make calls. (The default setting is [Tone].)
1
Tap [Landline] in the home screen or app list.
40
Advertisement
Table of Contents
