PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 6 REMCS Messages
Message code
RMG_0131
Sending Software Configuration Information frame
display completed.
RMG_0134
Sending software configuration information
completed.
RMG_0135
Failed to send software configuration information.
(xxx)
RMG_0137
Send software configuration information to the
REMCS Center.
RMG_0139
Execute software configuration information sending.
Confirm sending result on event log display frame.
RMG_0141
Software configuration information sending started. None.
TABLE 6.25 Messages in the CE initial frame
Message code
Failed to make frame screen data. (xxx)
RMG_0002
RMG_0004
Invalid CGI parameter specified.
RMG_0009
FE initial frame display completed.
TABLE 6.26 Messages in the [Environment settings] window
Message code
Failed to get Machine status.(xxx)
RMG_0001
\n(MachineID=xxxxxx)
Failed to make frame screen data. (xxx)
RMG_0002
Invalid CGI parameter specified.
RMG_0004
RMG_0015
Invalid entry.
RMG_0016
Input value is out of range.
RMG_0018
Failed to get registration data.(xxx)
Message
Message
Message
73
Action
None.
Check whether the network
status is normal.
Click the [OK] or [Cancel]
button.
Confirm sending result on event
log display frame.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
None.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Correct the entered value.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
C122-E120-06EN