Table 6.21 Messages In The [Result Of Connection Check] Window; Table 6.22 Messages In The [Temporary Disconnection] Window Or [Reconnection] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 6 REMCS Messages
Message code
RMG_0053
Execute the connection check. Are you sure?
RMG_0055 Connection check frame display completed.
RMG_0056 Failed in the connection check notification. (xxx)
RMG_0058 Connection check notification completed.
RMG_0181
Invalid E-mail address specified.
RMG_0182
Enter E-mail address of administrator or installer.
RMG_0183 Specify [E-mail address for receiving results.].

TABLE 6.21 Messages in the [Result of connection check] window

Message code
Failed to make frame screen data. (xxx)
RMG_0002
RMG_0004 Invalid CGI parameter specified.
Failed to setting Machine status. (xxx)
RMG_0041
Failed in the connection check notification.(xxx)
RMG_0056
RMG_0058
Connection check notification completed.
RMG_0185
Connection check frame display completed.

TABLE 6.22 Messages in the [Temporary Disconnection] window or [Reconnection] window

Message code
Failed to get Machine status. (xxx)
RMG_0001
Failed to make frame screen data. (xxx)
RMG_0002
Invalid CGI parameter specified.
RMG_0004
RMG_0041 Failed to setting Machine status.(xxx)
RMG_0059
Execute temporary disconnection to the REMCS
Center. Are you sure?
RMG_0060 Reconnection to the REMCS Center completed.
Message
Message
Message
71
Action
try again. If the problem is not
solved, contact the support
center.
Click the [OK] or [Cancel]
button.
None.
Check whether the network
status is normal.
None.
Enter a valid value.
Specify a valid value.
Enter a valid value.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Check whether the network
status is normal.
None.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Click the [OK] or [Cancel]
button.
None.
C122-E120-06EN