Fujitsu PRIMEQUEST 1000 Series Installation Manual page 102

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 6 REMCS Messages
Message code
RMG_2012 (SMTP)An error was detected during communication to the specified mail(SMTP)
server.
The specified SMTP server does not support SMTP AUTH. Or the SMTP server does
not support specified auth type.
The following causes can be considered.
- Specified SMTP server is wrong.
- Specified auth type is wrong.
(Message from the SMTP server)
xxxxxxxxxxxxxxxxxxxx
RL:xxx,ML:xxx
Message
82 C122-E120-06EN